- 9 -
RTE 7 RTE 10 RTE 17 RTE 740
6
5
/8 x 7¼ x 6
16.8 x 18.3 x 15.2
8¾x 9
3
/8 x 6
22.4 x 23.9 x 15.2
8¾ x 9
3
/8 x 9
22.4 x 23.9 x 22.9
1.9
7.2
2.6
9.8
4.5
17.0
6
5
/8 x 7¼ x 6
16.8 x 18.3 x 15.2
1.9
7.2
200170
60
27.2
68
30.8
71
32.2
87
39.5
R134a (6 ounces)
R404a (8 ounces)
Heater (Watts)
115V/60 Hz Models
230V/50 Hz Models
100V/50-60Hz Models
Refrigerant
Bath Work Area
5
(W x L x D)
Inches
Centimeters
Bath Volume
Gallons
Liters
Air Flow Requirements
SCFM
Weight
5
Pounds
Kilograms
General Information
1. Specifications subject to change.
2. Baths are tested at temperatures below freezing with denatured alcohol. This fluid is HIGHLY
flammable and is not recommended by Thermo. Above 80°C, baths are tested at with silicone
oil. This fluid is known to release a formaldehyde vapor (which is carcinogenic) above 150°C.
3. 20°C ambient. 20°C bath temperature using water. Sea level. Measured at the center of the
work area, work cover on, no external flow, stable ambient, full refrigeration (RTE-740 in
Energy Saving Mode). For some applications, agitation and stability above ambient may be
improved by connecting a small length of hose between the pump connections on the rear of
the unit.
4. 20°C ambient. 20°C bath temperature using water. Pump fully loaded. Sea level.
5. See next page for unit dimensions.
6. Add approximately 3 pounds (1.4 kilograms) for shipping weight.
800 1600 800
2000 2000 2000
800 1200 800
To Next Page
Loading...
Need help?
General
