3
ELECTRICAL CONNECTION
• Be sure to turn o the power before removing the cover, to prevent
any risk of injury or electric shock.
• Upstream of the appliance, the electrical installation must have an
all-pole cut-out device (circuit-breaker, fuse) compliant with the local
installation rules in force (30 mA residual current device).
• If the cable is damaged, it must be replaced with a cable or a
special pack available from the manufacturer or the After-Sales
service.
• Earthing is mandatory. A special terminal marked
is provided for
this purpose.
• Products including a battery: There is a risk of explosion if the
battery is replaced with an incorrect battery. Dispose of used
batteries in accordance with local regulations.
• The user manual for this appliance can be obtained from the After-
Sales service.
• These appliances comply with directives 2014/30/EU relating to
electromagnetic compatibility, 2014/35/EU relating to low voltage,
2015/863/EU and 2017/2102/EU relating to ROHS and 2013/814/EU
which completes directive 2009/125/EC relating to ecodesign.
General warnings