EasyManuals Logo
Home>Timex>Watch>100 Lap Ironman Triathlon with the FLIX

Timex 100 Lap Ironman Triathlon with the FLIX User Manual

Timex 100 Lap Ironman Triathlon with the FLIX
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
100 Lap Ironman Triathlon with the FLIX
Plain language instructions for the 100 Lap Ironman Triathlon with the FLIX Indiglo activation system.
1. SETTING THE WATCH
Setting
Example of setting the watch
2. CHRONO (stopwatch)
Timing with the chronograph
Storing and clearing the chrono memory
Chronograph terms
3. TIMER
Setting
Starting/Stopping
4. ALARM
Setting
Arming and disarming the alarm
5. MEMO
Setting
6. INDIGLO
Activation of the FLIX System Indiglo night-light
There are 6 buttons on the watch, and to prevent confusion I will identify each by its location upper right,
lower left on the side, lower left on the face, etc. Each button tends to have the same sort of function in
most watch modes, and given only that information, you can figure out most things with your watch, so
I'll give those functions first.
MODE also called PREVIOUS
The lower button on the left side - moves you around outside the modes. (Or backward through the
inside of a mode.)
INDIGLO
The upper button on the left side activates the Indiglo nightlight.
STOP/RESET also called SCROLL DOWN (button with a raised line)
The lower left button on the face makes changes downward.
START/SPLIT also called LAP-NEXT (button with 3 raised bumps)
The lower right button on the face moves you around forward inside the modes.
RECALL also called SCROLL UP
The upper button on the right side makes changes upward.
SET also called STATUS
The lower button on the right side gets you into and out of setting mode.
1. SETTING THE WATCH.
SETTING
1. First, find the regular time mode by pressing the MODE button until the time (with the date at the
top) shows.
2. Press & hold the SET button until the word ENTER disappears and is replaced by the word TIME.
Release that button. You'll notice that at the top of the display, the words SET T1 or SET - T2.
This is where you select between setting the 1st time zone or the 2nd time zone. Select between T1
or T2 by pressing the RECALL button or the STOP/RESET button.
3. Press either the MODE or the START/SPLIT button. You'll notice that whatever is blinking is

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Timex 100 Lap Ironman Triathlon with the FLIX and is the answer not in the manual?

Timex 100 Lap Ironman Triathlon with the FLIX Specifications

General IconGeneral
BrandTimex
Model100 Lap Ironman Triathlon with the FLIX
CategoryWatch
LanguageEnglish

Related product manuals