Tommee Tippee Express and Go User Manual



Ensure all pouch holder and teat
parts have been washed and sterilised
as per guidelines before use
Leaving hood on teat, attach to
screw ring adapter
1 2
Screw the assembled ring and
teat to the pouch and holder
3
The pouch bottle is now ready
to use
4
When ready to feed, remove hood. Always ensure the pouch is upward facing.
Once feed is finished dispose of pouch and wash/sterilise all other parts as per
manufacturers guidelines
5 a
Place pouch in to the holder
and click in to place. Ensure the
measurement markings are
facing outwards - remove
screw cap once in place
Breast milk can be expressed directly in to express and go
breast milk pouches using our breast pump adapters
Select the relevant adapter for
the brand of breast pump you are
using
Screw the adapter on to your
breast pump
2
Attach the pouch to the
pump/adapter and express. Keep the
pouch cap in a clean safe place so it
can be replaced after expressing
3
4 a
Once you have finished expressing or when the pouch is full, unscrew from
the pump and replace the screw cap
4 b
1
Pouches should be marked and dated
for reference using a soft tipped
marker so as not to damage the bag.
Depending on how the milk freezes in
the bag, you may not get an accurate
read so we recommend recording the
volume expressed in the 'notes' section
5
2. ASSEMBLING THE POUCH HOLDER
1. CONNECTING STORAGE
POUCHES TO BREAST PUMP
5 b
DISASSEMBLE THE REST OF THE UNIT AND STERILISE
ALL PARTS AS PER MANUFACTURERS GUIDELINES

Tommee Tippee Express and Go Specifications

General

Brand	Tommee Tippee
Model	Express and Go
Category	Baby Accessories
Language	English