1.21 1.21
Specications
ALL FIGURES ARE NOMINALLY QUOTED AT THE RATED ENGINE SPEED OF 2800 RPM
UNLESS OTHERWISE STATED.
Engine
T4240
Type: Kubota V2203 Diesel
4 cylinders in line
Power Rating: 35.3 kw (47.3 hp) @ 2800 rpm
DIN 70020
Capacity: 2197 cc (134 cu in)
Air Cleaner: Clean air drawn through a screened
air intake via a cyclonic air cleaner
with built in pre-cleaner.
Cooling System: Water cooled
Battery: 12V 480 Amps S. A. E.
Alternator: 40 Amps
Starter: 1.4 kw (1.6 hp) Electric
Cold Starting: Glow plug
Idle Speed: 1250 (± 50) rpm
Fuel Type: Diesel
IMPORTANT - PREVENT DAMAGE: For further information regarding the engine, refer to the Engine
Manual.
Transmission System
Drive Type: Hydraulic
Pump: Variable displacement hydraulic piston pump with integral charge pump
servo assisted
Wheel Motors: Front Axle - ‘twin lock’ radial piston, xed displacement, with integral disc
brake (pressure released)
Rear Axle - radial piston, xed displacement
Differential Lock: Electro - hydraulic control valve with pedal control (only available in ‘work’
mode)
Drive: 4WD in ‘work’ and ‘transport’ modes.
Relief Valve Setting: Main service relief 350 bar (5075 psi) differential
Charge pressure relief 29 bar (421 psi) differential
SPECIFICATIONS
To Next Page
Loading...
Need help?
General
