Overview of the Virtual Pedal Stop (VPS) Feature
(continued)
• This feature allows you to customize the speed settings for your comfort level, or to
customize the speed settings to fit the application.
• Whenever the maximum traction speed is changed via the supervisor maximum speed
settings or Virtual Pedal Stop, the traction pedal is automatically reprogrammed to use
the full pedal stroke between neutral and the new maximum speed. This means the
operator gains more precise control of the traction speed at lower maximum speed
settings.
Tips for Using Virtual Pedal Stop (VPS)
• Set the max speed temporarily lower for mowing the cleanup pass on the fairway.
• Set the max speed temporarily lower for improved control operating in or near the
maintenance shop.
• Set the max speed temporarily lower for improved control loading the machine onto a
trailer.
Cruise Control
Cruise Control Operation
G439038.svg
The cruise-control switch locks in the cruise
control to maintain the desired ground speed.
Pressing the rear of the switch turns the cruise
control off, the middle position of the switch
enables the cruise-control function, and the front of
the switch sets the desired ground speed.
After the cruise control switch is enabled and the
speed is set, use the InfoCenter display to adjust
the speed setting of the cruise control.
To disengage the cruise control use the following:
• When in transport range, press the reverse
traction pedal, engage the parking brake, or
press the cruise control switch to the O
FF position.
• When in mow range, press the reverse traction pedal, engage the parking brake,
disengage the PTO, or press the cruise control switch to the O
FF position.
Note: Disengaging cruise control results in the machine dynamically braking to a stop. If
you would like to disengage cruise control but continue driving, press the traction pedal
and then disengage the cruise control for a smooth transition from cruise control to
manual speed control.
Adjusting the Cruise Control Speed
1. Enable the cruise control switch on the console.
3464-482A Page 5–17 Operation: During Operation
To Next Page
Loading...
Need help?
General
