Form No. 3356-867 Rev A
TimeCutter® Riding Mower
Model No. All models
Setup Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
No parts required
–
Charge the battery.
Bolt (1/4 x 3/4 inch)
2
Washer
2
2
Nut (1/4 inch)
2
Connect the battery.
Seat
1
Spacers 2
Flat washers
2
3
Knobs
2
Install the seat.
Control lever
2
4
Bolt (1/4 x 3/4 inch)
4
Install the motion control levers.
Ignition Key
1
Operator’s Manual
1
Engine Operator’s Manual
1
Hose coupling
1
5
Operator Training Material
1
Complete thesetup.
Note: Deter mine the left and right sides of the
mac hine from the nor mal operating position.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
To Next Page
Need help?
General
