Torqeedo Cruise 0.8 R User Manual

27
Operating Manual Cruise 2.0 R / 4.0 R
9. Operation
9.2.3 Calibrating the battery charge indicator
Having entered the battery information in the setup-menu, the on-board computer now
knows the capacity of the battery bank. When the motor is in use, the on-board computer
measures the consumed power and determines the remaining battery charge in percent
and the remaining range based on the current speed.
The calculation of the remaining range takes into account the fact that lead-based
batteries do not provide their full capacity at higher electrical currents. Depending on
the battery used this effect may result in the battery charge indicator showing a relatively
high charge level in percent but the remaining range at full throttle is very low. By moving
slower you can still use the available battery charge.
To use the indicator of the battery charge status and remaining range in your Cruise, your
assistance is required in two ways:
Fault codes
Display Cause What to do
E36 Input voltage too high Theinputvoltageishigherthanthe35V
(Cruise2.0R)or65V(Cruise4.0R).Check
the battery connection as per Section 8.
E45 Battery overcurrent The electronics measure unusually high
power consumption. Motor can continue to
be used slowly. Contact Torqeedo Service.
E46 Overtemperature on the
electronics
Can occur with extremely high external
temperatures, high output and low battery
charging status. The motor can continue to
beusedafterthetemperaturehasstabilized.
Other error
codes
Defects Contact Torqeedo Service and notify them of
the error code.

Torqeedo Cruise 0.8 R Specifications

General

Brand	Torqeedo
Model	Cruise 0.8 R
Category	Outboard Motor
Language	English