44
Password setup (Parental lock) (DTV mode only)
Note:
• There are 15 age-based
ratings, ranging from “4”
(years old) to “18” (years
old), “None” and “Block
All”. For example, if the
parental lock is set to “8”
(years old), only the
services with parental
rating of “8” (years old)
and under will be viewable
without entering the
password.
• You will be prompted to
enter the password when
you set a new parental
rating.
You can set the new
parental rating only when
you enter the password
correctly; otherwise the
old parental code will be
retained.
Password Setup (Parental lock)
This feature allows you to have parental control of services based on your viewing preferences.
Once a service is protected with a password, it cannot be viewed unless the correct password
is provided.
1
Press MENU SETUP or DIGITAL MENU to display the Main Menu screen.
2
Press to select the Setup menu, and then
press ENTER/CH LIST .
Press to select Password Setup, and then
press ENTER/CH LIST .
The Enter Password window will appear.
3
Use the number buttons (0–9) to key in “0000”. This is the factory default password.
4
Press to select Parental Lock, and then press to select a preferred parental
rating (see Note).
Press EXIT/CANCEL to return to the normal screen.
5
You can also change the password using the Change Password option.
Press to select Change Password, and then press ENTER/CH LIST to enter
a new password (0 to 9).
Make sure to remember this password.
Re-enter the same password again for confirmation.
Press EXIT/CANCEL to return to the normal screen.
While toggling between channels, if a service with parental rating is selected, you will be asked
to enter the password to view that channel. If the channel you are currently watching supports
a parental rating, the rating will also be displayed in the Channel banner menu (see page 27).
To Next Page
Loading...
Need help?
General
