Need help?Do you have a question about the Toshiba 26EL933G and is the answer not in the manual?
General| Comb filter | 3D |
|---|---|
| Smart modes | Game, PC, Standard |
| Response time | 20 ms |
| Display diagonal | 26 \ |
| Display brightness | 350 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Native refresh rate | 100 Hz |
| LED backlighting type | Edge-LED |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p |
| Contrast ratio (dynamic) | 1000000:1 |
| Display diagonal (metric) | 66 cm |
| Screen format adjustments | 4:3, 16:9, Zoom |
| Supported graphics resolutions | 1366 x 768 |
| Annual energy consumption | 39.4 kWh |
| Video formats supported | H.264 |
| On Screen Display (OSD) languages | BUL, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, HUN, ITA, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, TUR |
| Product color | Black |
| Panel mounting interface | 200 x 100 mm |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC, NTSC 4.43, PAL BG, PAL I, SECAM B/G, SECAM D/K |
| Digital signal format system | DVB-C, DVB-T |
| Audio system | NICAM, Dolby Digital Pulse |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Compatible memory cards | Not supported |
| Consumer Electronics Control (CEC) | Anynet+ |
| Number of OSD languages | 24 |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 27 W |
| Certification | RoHS |
| Package weight | 8500 g |
Weight and Dimensions| Depth (with stand) | 180.3 mm |
|---|---|
| Height (with stand) | 426.2 mm |
| Weight (with stand) | 6000 g |
| Depth (without stand) | 46 mm |
| Width (without stand) | 619.8 mm |
| Height (without stand) | 389.2 mm |
| Weight (without stand) | 5500 g |
To Next Page
