Strata CTX DKT/IPT Telephone Quick Reference Guide 06/04 3
Which Codes Do I Use?
Default feature codes are listed in this guide. Check with your System
Administrator to see if these codes have been changed. If so, write the
new codes in the blank lines and cross out the default codes. For
example:
&QI7UQ
+
or
.
Making a Call
Hot Dialing
1. To make a call using Hot Dialing, dial the number.
2. When connected, you can continue speakerphone operation or
lift the handset and continue the conversation.
Spkr Button
1. To make a call, press
6SNU
.
2. Dial the number.
3. When connected, you can continue to use the speakerphone or
lift the handset and continue the conversation.
Handset
1. To make a call, lift the handset, then dial the number.
2. When connected, you can continue to use the handset or switch
to speakerphone by holding down
6SNU
and replacing the
handset.
Answering a Call
³ Lift the handset or press
6SNU
.
S If you don’t have Ringing Line Preference: press the flashing line
or extension button and lift the handset.
Handsfree Answerback
³ To receive a handsfree internal call over the speakerphone
1. You hear a single long tone, then the caller’s voice. Do not lift
the handset; speak toward the telephone in a normal voice.
2. Press
6SNU
or take the handset off-hook if you wish to
transfer the call or place it on hold.
³ To switch between Handset and Speakerphone
³ Press
6SNU
and place the handset on-hook to switch from
Handset to Speakerphone mode.