1. First you should write DVD Firmware into a CD.
2. Put the CD into DVD loader of TV.
3. The TV will detect the firmware automatically.
4. As soon as it detects, you will see below items on the screen.
Upgrade File Detected
Upgrade ?
Press Play To Start
5. Press play.
6. As soon as you press play, you will see "Upgrading" on the screen.
7. TV will give the CD out.
Attention: Please pay attention that the uploading process is not finished here therefore you
shouldn't power off/on the TV.
8. Wait until the DVD background screen as shown below, appears again. It may take around
3 minutes.
9. DVD Firmware Update is completed.
DVD FIRMWARE UPDATE FROM CD
To Next Page
Loading...
Need help?
General
