For example; How to prohibit Test operation from WTA (If you need)
* Do it again if the 7-segment display is different from the above.
* The functions other than the test operation of this Application can work normally even if the test operation
function are prohibited.
7-8-4. Confirmation for NFC tag Communication
When you cannot read out the information of the NFC tag with your smartphone, preform the following step.
If
above check is no problem, refer to User Guide of Wave Tool Advance.
T
r
ademark
QR code is a trademark or registered trademark of DENSO
WAVE INCORPORATED.
Android is a trademark or registered of Google LLC.
Rotary switch Push switch
Step
7-segment
display
Check result
SW01 SW02 SW03 SW04 SW05 SW06
nFc. Normal
1 2 16 14 — — —
nFc.Er
NFC tag wiring trouble
Check NFC tag wiring
2 1 1 1
U
∗
---
(Return to Rotary switch)
SW01 SW02 SW03 SW04 SW05 SW06
1 Change rotary switch position for Outdoor DN code setting 9 1 1 - - - dn.SEt
2 Push SW04 for activate DN code 9 1 1 Push - - dn.001
3 Change DN code Number to "dn.005" with SW05 or SW06 9 1 1 - Push Push dn.005
4
Change data value display with SW04
*"d.⌴⌴⌴0" shows validness of TEST operation by NFC App in case of the
outdoor unit power ON within 48h.
9 1 1 Push - - d.⌴⌴⌴0
5
Change value to "d.⌴⌴⌴1" with SW05 or SW06
*"d.⌴⌴⌴1" shows prohibition of TEST operation by NFC App.
9 1 1 - Push Push d.⌴⌴⌴1
6
Push SW04 more than 2sec.
7-seg display will change from flashing to lighting.
9 1 1
Push
more
than 2
sec
- -
Flashing-->
d.⌴⌴⌴1
Lighting
7 Return to default Rotary switch position. 1 1 1
- - - U * ---
8 Turn ON/OFF ourdoor unit main power supplies. Keep turn off time 60 seconds or more.
Steps Items
Rotary switch Push SW
7-segment
display
To Next Page
Loading...
Need help?
General
