Page 2 of 10
TOYOTA CAMRY KEYLESS ENTRY SYSTEM
Negative Battery
REMOVE THE DRIVER'S SIDE KICK PANEL:
REMOVE THE DRIVER'S SIDE SCUFF PLATE:
REMOVE THE SIDE DASH PANEL:
INSTALLATION PREPARATION
Before starting installation
1. Familiarize yourself with the installation
instructions.
2. Inspect kit components (Refer to kit
contents and hardware bag contents).
VEHICLE PREPARATION
1. Place protective coverings on vehicle.
2. "IMPORTANT........IMPORTANT"
Disconnect Negative Battery
Cable
1. Refer to the vehicle repair manual, and
carefully remove front kick panel.
1. Refer to the vehicle repair manual, and
carefully remove front scuff plate.
PLASTIC NUT
1. Refer to the vehicle repair manual, and
carefully remove the driver's side dash finish
panel.
Southeast Toyota Distributors, LLC
To Next Page
Loading...
Need help?
General
