Toyota RSE User Manual

128-8673b
41 of 48
- 31 -
TROUBLESHOOTING
Problem Solution
Power LED does not light. • Make sure the monitor is fully seated in the seat top dock.
• Make sure power is applied to the unit. Place the vehicle in the ACC or ON mode using the
power (ignition) switch.
• Make sure the in-line fuse is not blown. Refer to the “Fuse Replacement” section on page 33.
Touch screen not responsive. • Align the touch screen. Refer to the “Align Screen” section on page 22.

Toyota RSE Specifications

General

Brand	Toyota
Model	RSE
Category	Car Receiver
Language	English