EasyManuals Logo
Home>TP-Link>Adapter>AV200

TP-Link AV200 Quick Installation Guide

TP-Link AV200
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Installation Guide
AV200 Nano Powerline Adapter
Package Contents
Resource CD
Ethernet Cable
QIG
TL-PA211/TL-PA210
AV200 Nano Powerline Adapter
Warning on Final Location
Powerline Adapter
7106504139 REV2.1.1
MODEL NO. TL-PA211/TL-PA210
LED and Button Descriptions
1
NOTE:
It's strongly recommended that you plug the adapter directly into the
wall socket, for some power strips have surge protector which can lter data.
Network Installation
2
To add another adapter
Plug an additional adapter into the wall socket, and the connection will be
established automatically within 60 seconds.
NOTE:
1.
2.
To surf the Internet, please make sure that your network is properly
connected to the Internet.
If the adapters fail to automatically link to each other, you can
establish a private network by using the pair button. To set up a
private network, please go to Appendix Using the Pair Button for
detailed instructions.
*
Five minutes after the device connected to the adapter is turned o, the adapter will
automatically switch to power-saving mode.
Item Status Description
Power LED
Powerline LED
Ethernet LED
Solid
Solid
Solid
Blinking
Blinking
Blinking
O
O
O
The adapter is on.
The adapter is o.
The adapter is in power-saving mode or in pairing
procedure.
The adapter is connected to a powerline network.
The adapter is transferring data.
The adapter isn’t connected to any powerline network
or is in power-saving mode. *
The Ethernet port is connected, but there is no data
being transferred.
The Ethernet port is transferring data.
The Ethernet port isn’t connected.
Item
Pair Button
Description
Pair button is used to secure a powerline network. To secure
your network, please refer to Appendix: Using the Pair Button.
Power LED
Powerline LED
Pair Button
Ethernet LED
Wall Socket
Wall Socket
Warning on Final Location
pair
pair
pair
200Mbps
pair
pair
pair
200Mbps
NOTE:
The product model shown in this QIG is TL-PA211, as an example
TP-LINK powerline adapters are Plug and Play. After taking the steps above,
you can surf the Internet.
pair
200Mbps

Other manuals for TP-Link AV200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link AV200 and is the answer not in the manual?

TP-Link AV200 Specifications

General IconGeneral
Wi-FiNo
ModulationOFDM
Power plug-
Ethernet LANYes
PowerLine standardHomePlug AV
Security algorithms128-bit AES
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN (RJ-45) ports1
Maximum data transfer rate200 Mbit/s
Maximum operating distance300 m
Ethernet LAN interface typeFast Ethernet
Product colorWhite
Sustainability certificatesRoHS
Power consumption (typical)1.6 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45)
Quantity per pack2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth58 mm
Width95 mm
Height42 mm

Related product manuals