EasyManuals Logo
Home>TP-Link>Media Converter>MC200CM

TP-Link MC200CM Quick Start Guide

TP-Link MC200CM
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2022 TP-Link 7106509775 REV4.0.2
Gigabit Ethernet Media Converter
Note: MC220L needs to be plugged in with an SFP module to work normally. It is recommended to use a TP-Link SFP module on MC220L, because other vendors’
SFP modules may be incompatible.
LC-SC Fiber Cable
Package Contents: Media Converter, Power Adapter, User Guide
Scenario 1: Connect Devices with and without Optical Interfaces
Ethernet device
with optical interfaces
Media Converter
1000Base-SX interface
Ethernet device
without optical interfaces
Gigabit Ethernet interface
Twisted-Pair Cable
Note:
1. Either two MC200CM converters or two MC210CS converters can work cooperatively. Two MC220L converters with the same SFP module can work cooperatively.
2. One MC220L can also cooperate with one MC200CM or one MC210CS. However, the mode and wavelength of the SFP module used in MC220L must be the same as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a ber cable.
Scenario 2: Connect Devices without Optical Interfaces
Fiber CableTwisted-Pair Cable Twisted-Pair Cable
Ethernet device
without optical interfaces
Media Converter Media Converter
Ethernet device
without optical interfaces
Enlarge Your Ethernet Network
For technical support and other information, please visit
http://www.tp-link.com/support, or simply scan the QR code.
MC200CM/ MC210CS/ MC220L
Note: MC200CM is used as an example throughout this guide. Other models may dier in appearance.
Gigabit Ethernet interface
Gigabit Ethernet interface

Other manuals for TP-Link MC200CM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link MC200CM and is the answer not in the manual?

TP-Link MC200CM Specifications

General IconGeneral
DC-in jackYes
Fiber optic connectorSC
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Wavelength850 nm
Fiber mode structureMulti-mode
Maximum transfer distance550 m
Fiber cable diameters supported (core/cladding)50/125, 62.5/125 µm
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
InternalNo
CertificationFCC, CE
Product colorBlack
LED indicatorsLink
Networking standardsIEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z
Ethernet interface typeGigabit Ethernet
Maximum data transfer rate1000 Mbit/s
Power consumption (max)5.5 W
Sustainability certificatesRoHS
Package depth165 mm
Package width204 mm
Package height65 mm
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth73 mm
Width94.5 mm
Height27 mm

Related product manuals