1
About This User Guide
When using this guide, notice that features available in the EAP may vary by model and software
version. Availability of the EAP may also vary by region or ISP. All images, steps, and descriptions in
this guide are only examples and may not reflect your actual experience.
Some models featured in this guide may be unavailable in your country or region. For local sales
information, visit
https://www.tp-link.com
.
The information in this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure the accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the warranty of any kind,
express or implied. Users must take full responsibility for their application of any product.
Conventions
Unless otherwise noted, the introduction in this guide takes EAP245 as an example.
Wireless Speed and Range Disclaimer
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11
specifications. Range and coverage specifications were defined according to test results
under normal usage conditions. Actual wireless transmission rate and wireless coverageare not
guaranteed, and will vary as a result of 1) environmental factors, including building materials,
physical objects and obstacles, 2) network conditions, including local interference, volume and
density of traffic, product location, network complexity, and network overhead and 3) client
limitations, including rated performance, location, connection quality, and client condition.
Ethernet Port Limitation Disclaimer
Actual network speed may be limited by the rate of the product’s Ethernet WAN or LAN port, the
rate supported by the network cable, Internet service provider factors and other environmental
conditions.
Wireless Client Capacity Disclaimer
Wireless client capacity specifications were defined according to test results under normal
usage conditions. Actual wireless client capacity is not guaranteed, and will vary as a result of 1)
environmental factors, including building materials, physical objects and obstacles, 2) network
conditions, including local interference, volume and density of traffic, product location, network
complexity, and network overhead and 3) client limitations, including rated performance, location,
connection quality, and client condition.
MU-MIMO Disclaimer (for EAPs that support MU-MIMO)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
