Quick Installation Guide
RE580D
©2016 TP-LINK 7106506216 REV1.2.0
Using your Web Browser
Option ONE
LED Explanation
Button Explanation
Power button: To turn on or off the extender, press the Power button.
LED button: To turn all LEDs on or off, press the LED button.
On: The extender is on.
Blinking: The extender is initializing.
Off: The extender is off.
(Power)
On: The extender is connected to the 2.4GHz/5GHz wireless network of your host network.
Off: No connection.
(5GHz)/ (2.4GHz)
On: The Ethernet port is connected.
Off: The Ethernet port is not connected.
(Ethernet)
AC1900 Wi-Fi Range Extender
Enjoy!
Both extended networks share the same Wi-Fi passwords as those of your host networks, but may have different wireless network names
if you have customized them during the configuration.
Configure
3
If your router does not support 5GHz wireless
network, please click Skip to continue.
Select your router's 2.4GHz/5GHz host
network, enter the password, and then click
Next.
Next
Please select 2.4GHz host network or skip this network.
SSID Signal
MAC Address
Security
Your router wireless name
30-B5-C1-33-99-76
Host 2.4GHz Password:
TP-LINK_123456
23-B5-C0-30-90-06
Exit Other... Rescan Skip
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
http://tplinkrepeater.net
admin
admin
Login
Launch a web browser, type
http://tplinkrepeater.net in the address
bar and use admin (all lowercase) for both
Username and Password to log in.
If the login window does not pop up,
please refer to the FAQ > Q1.
1
4
5
Verify your wireless settings and click Finish.
Corresponding LED(s) ( 2.4GHz/ 5GHz)
should turn solid on.
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID:
Your network name
Copy Host SSID
Hide SSID broadcast
Note: The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Your network name_5G
Copy Host SSID
Hide SSID broadcast
Note: The extended 5GHz password is the same as your Host password.
Back Next
2
Create a new username and password
for secure management purpose, and
click Confirm.
Either keep the default SSIDs or customize
them for the extended networks, and then
click Next.
Relocate
1. Plug in the extender halfway between your wireless router (Host Network) and the Wi-Fi dead zone.
2. Wait for the extender to reconnect and the LED turns solid blue. If not, relocate it closer to the router to achieve better signal quality.
Ideal Extender PlacementRouter Clients
Extended NetworkHost Network
or
1. Unplug the Ethernet cable from your computer (if any).
via Wireless
Connect to the Extender
Power on
2. Connect your computer to the extender via an Ethernet cable.
1. Disable the Wi-Fi on your computer.
via Ethernet Cable
Plug the extender’s adapter into an
electrical outlet near your router. Then turn
on the extender and wait until the Power
LED is lit and solid blue.
2. Click the Wi-Fi icon on the taskbar and connect to the
extender’s network (e.g. TP-LINK_Extender_2.4G or _5GHz).
To Next Page
Need help?
General
Weight and Dimensions
