©2022 TP-Link
7106509576 REV1.0.0
Plug the extender into a power outlet next to your router. Wait until
its Power LED turns solid on.
Note: For safety, only plug the extender in the direction as shown below.
Power On
Quick Installation Guide
Range Extender
1
Next to
Relocate
3
Set Up
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The passwords of your extended networks are
the same as your host router.
Tip: You can also set up the extender in Access Point mode to transform your existing wired
network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.
Router Devices
Halfway
Blue: Suitable location
Red: Too far from router
Via the Tether App
1. Get the up-to-date Tether app from the
Apple App Store or Google Play, or simply
scan the QR code.
Note: If the LED does not turn solid on, please
refer to FAQ > Q2.
2. Launch the Tether app and log in with your
TP-Link ID. If you don’t have an account,
create one first.
Welcome to Tether
Log In
TP-Link ID (Email)
Sign Up Forgot Password?
Password
3. Tap the button and select Range Extender.
Tether
Scan for Tether
or
Note: If you cannot find your device, please refer to
FAQ > Q1.
For more details, please refer to the user guide at
https://www.tp-link.com/support/download.
More Setup Methods
1. Connect your computer or smartphone to
the extender’s network TP-Link_Extender.
2. Visit http://www.tplinkrepeater.net or
http://192.168.0.254 in a web browser.
Create a password to log in.
3. Follow web instructions to complete the setup.
Via a Web Browser
Extended Network Names:
Router’s network name with
EXT
at the end
or
Same as your OneMesh router
(See back for OneMesh details)
Passwords:
Same as your router
2
4. Follow app instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The LED should
change from blinking to solid on, indicating
successful connection.
1. Press the WPS button on your router.
Via the WPS Button
Note: WPA3 required for 6 GHz bands does not allow WPS
connection. To connect to a router’s 6 GHz band, please
connect via the Tether app or web browser.
Setup with videos
Scan the QR code, or visit
https://www.tp-link.com/support/setup-video/#range-extenders
and search for the setup video of your model.
Solid On
Solid On
* Images may differ from your actual product.
Tip: To place the extender for optimal Wi-Fi performance, access extender settings
via the Tether app and go to Tools > Location Assistant, or simply scan the QR code
to visit https://www.tp-link.com/support/faq/3103/.
My Devices
No devices found.
Choose Your Device Type
Wireless Router
Gaming Router
Range Extender
To Next Page
Need help?
General
Weight and Dimensions
