Need help?Do you have a question about the TP-Link Tapo C225 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Auto-tracking | Yes |
| Certification | CE, RCM, WEEE, EAC |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Form factor | Tower |
| Mounting type | Desk |
| Product color | Black, White |
| Pan range | 0 - 360 ° |
| Pan speed | 120 °/sec |
| Tilt angle range | 0 - 149 ° |
| Camera shutter type | Electronic |
| Field of view (FOV) angle | 360 ° |
| LED type | IR |
| Infra-red wavelength | 940 nm |
| Number of illumination LEDs | 1 |
| Optical sensor size | 1/3 \ |
| Effective sensor resolution | 1440 pixels |
| Number of effective pixels (H x V) | 2560 x 1440 pixels |
| Fixed focal length | 4 mm |
| Maximum aperture number | 1.6 |
| Total megapixels | - MP |
| Supported video modes | 1440p |
| Video compression formats | H.264 |
| Audio system | 2-way |
| Ethernet LAN | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Supported network protocols | TCP/IP, DHCP, ICMP, DNS, NTP, HTTPS, TCP, UDP, ONVIF |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 512 GB |
| Security algorithms | WPA, WPA2-PSK |
| Alert notification type | Push notification, Snapshot alert message |
| AC input voltage | 100 - 240 V |
| DC output current | 1 A |
| DC output voltage | 12 |
| Power source type | DC |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Height | 112 mm |
|---|---|
| Diameter | 80 mm |
To Next Page
