1
If you currently use a modem, disconnect it now - the Modem Router will
replace your current modem.
Connect your computer to the Port
labeled “1~4” on the Modem Router
with an Ethernet cable.
If no telephone is needed, please connect the ADSL port of the Modem
Router to the wall jack using the telephone line directly.
Note
Installation
Note
Please use only wired network connections to configure the Modem Router.
Connect the splitter to the wall
ack using a telephone line,
then use the other telephone
line to directly connect it to the
DSL port on the Modem
Router and the MODEM port
of the splitter, also have the
PHONE port of the splitter
connected to a telephone.
To Next Page
Need help?
General
