TP-Link TG-3468 V4 User Manual

Quick Installation Guide
Guide d'installation rapide
Guia de Instalação Rápido
Guia de Instalación Rápida
PCI Express Network Adapter
Images are for demonstration only.
For technical support, replacement services, user guides, and
other information, please visit https://www.tp-link.com/support
7106508970 REV1.0.0

TP-Link TG-3468 V4 Specifications

General

Interface	PCI Express
Data Rate	10/100/1000Mbps
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Port	1 x 10/100/1000Mbps RJ45
Operating System Support	Windows 10/8.1/8/7
Flow Control	IEEE 802.3x

Summary

Hardware Connection Guide

Prepare Computer for Installation

Turn off your computer, unplug the power cable, and remove the case panel before installation.

Install PCI Express Network Adapter

Locate an available PCI-E slot and carefully insert the adapter. Use low-profile bracket if needed.

Finalize Hardware Setup and Connection

Replace the case panel, power on the computer, and connect the Ethernet cable to the adapter.

Driver Installation Process

Install Driver from CD or Download Center

Run Autorun.exe from the CD or download the driver from the TP-Link support website.

Complete Software Installation

Select your adapter model and follow the on-screen instructions to complete the driver installation.

Troubleshoot Driver Installation Failures

Disable antivirus software and firewall temporarily if you encounter issues during driver installation.

Frequently Asked Questions

Finding Drivers Online

Download drivers from the TP-Link support website if the installation CD is lost or broken.

Identifying Hardware Version

Check the product label or visit the TP-Link FAQ page for details on identifying the adapter's hardware version.

Troubleshooting Hardware Detection Issues

Restart the computer, reinsert the adapter, or try a different PCI-E slot if the PC cannot find the new hardware.