TP-Link TL-WA500G Installation

1
Assign a static IP address 192.168.1.100 for your computer. Please refer to
the T3 in Troubleshooting guide if you need assistance.
Connect to the Access Point with
the Ethernet cable or via
wireless.The default SSID of the
Access Point is TP-LINK_
XXXXXX. The XXXXXX is the last
6 characters of the Access Point’s
MAC address.
Plug the provided powe
r
adapter into the power jack on the
back of the Access Point, and the
other end to a standard electrical
wall socket.
Note
If the distance between the outlet and the Access Point is too long to supply
the power, you can refer to the Power over Ethernet(PoE) solution in
Appendix B: With PoE Setup.

TP-Link TL-WA500G Specifications

General

2.4 GHz	Yes
Modulation	DBPSK, DSSS, OFDM, QPSK
Frequency band	2.4 - 2.4835 GHz
Cabling technology	10/100Base-T(X)
Maximum data transfer rate	54 Mbit/s
Wireless technology	802.11b/g
Compliance industry standards	IEEE 802.11g, IEEE 802.11b
Non-operating relative humidity (non-condensing)	10 - 90 %
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Dimensions (WxDxH)	150 x 100 x 28 mm