TP-Link TL-WPA8631P Quick Installation Guide

Existing Powerline Device
(for demonstration only)
* TL-WPA8631P (European version) is used for demonstration in this guide.
* Images may dier from actual products.
Pair the powerline devices.
4
3
Relocate the extender to the Wi-Fi “dead” zone.
Connect your devices to the internet using the
default SSIDs (network name) and password
on
the label at the side of the extender
.
Note: If the Power LED does not blink, press the Pair
button again.
Press the Pair button on the existing powerline
device for 1 second. The Power LED starts blinking.
A
Within 2 minutes, press the Pair button on the new
extender for 1 second. The Power LED starts blinking.
When the Powerline LED on the new extender turns
on, the pairing process is complete.
B
Note:
If the powerline LED is o, try another wall socket
or pair again.
New Extender TL-WPA8631PExisting Powerline Device
Quick Installation Guide
TL-WPA8631P
Within 2 minutes
Powerline
Check the new extender’s Powerline LED . Is it on?
Step 4>
Step 3>
2
New Extender
TL-WPA8631P
1
Plug in the new extender near one of your existing powerline devices.
Blinking
Attention
2. Plug powerline devices into wall outlets instead of power strips.
Using a power strip will aect network performance and may even cause dropped connections.
1. Use the product only in the upright direction.
Wall Outlet Power Strip
If you cannot nd the SSIDs in your Wi-Fi network list, your new extender has automatically
copied over the existing wireless settings. In this case, use the SSID and password of your
existing powerline network to connect.
If you want to unify your Wi-Fi networks, refer to the back page for instructions.
Blinking
On
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX

TP-Link TL-WPA8631P Specifications

General

Universal Plug and Play (UPnP)	Yes
Networking standards	IEEE 1901, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DSL WAN	-
SIM card slot	No
Modulation	OFDM
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
Power supply	13 W
Power source type	AC
Power consumption (typical)	11 W
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN (RJ-45) ports	3
Antenna type	Internal
Certification	CE, RoHS
Product color	White
LED indicators	Activity, LAN, Power, WLAN
Security algorithms	128-bit AES
Power plug	Type G
Maximum operating distance	300 m
WLAN data transfer rates supported	300, 867 Mbit/s
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
Package type	Box
Cables included	LAN (RJ-45)
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	42 mm
Width	75 mm
Height	152 mm