TP-Link TL-WR842ND Quick Installation Guide

Hardware Connection
1
Quick Installation Guide
300Mbps Multi-Function Wireless N Router
MODEL NO. TL-WR842ND
Conguration by Setup Wizard
2
7106503674
Package Contents
Resource CD
Ethernet Cable
Power Adapter
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing without CD-ROM, please refer to Appendix 2.
2
Click START and the Easy Setup Assistant will guide
you step by step to set up the USB Printer.
TL-WR842ND
QIG
MODEL NO. TL-WR842ND
300Mbps Multi-Function Wireless N Router
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
Select TL-WR842ND and click USB Printer Setup.
3
Select your language from the drop-down list.
Click START and
the Easy Setup Assistant will
guide you step by step to set up the Router.
4
Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Select TL-WR842ND and click Easy Setup Assistant.
Appendix 1: Conguring the USB Printer
The USB Printer Setup Wizard is currently supported in Windows 7 32bit, Windows Vista 32bit, Windows XP 32/64bit, Windows 2003 and
Windows 2000 . Please follow the steps below to finish the printer configuration.
Printer
USB ash disk
2
3
Computer
Wall Socket
1
Cable/DSL Modem
Internet
Click Install to install USB Printer software and click
FINISH to complete the setup when you see the Finish
page.
3
After nishing the USB Printer Setup Wizard, you may be
prompted "Found New Hardware" on your desktop.
Please follow the instructions to install suitable driver
for your own printer. After that, users in the LAN can
share the printer via the Router.
USB hard drive
* Some USB hard drives that work at a high
power without using any external power
adapter might not be supported.
Connect the WAN port on your Router to the Modem’s
LAN port with an Ethernet cable.
1
To use the Router to share les or printer, plug an external USB hard
drive/USB ash disk into the USB port, or connect a USB printer to the
USB port. For specic conguration procedures of the USB Printer,
please refer to Appendix 1.
Connect your computer to one of the ports labeled 1~4 on
the Router with an Ethernet cable.
2
Plug the provided Power Adapter into the POWER jack and
the other end to a standard electrical wall socket.
3

TP-Link TL-WR842ND Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11n
VPN tunnels quantity	5
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Rack mounting	No
Frequency range	2.4 - 2.4835 GHz
USB ports quantity	1
Supported network protocols	PPTP, L2TP, PPPoE, FTP
Security algorithms	128-bit WEP, 152-bit WEP, 64-bit WEP, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Antennas quantity	2
Antenna connector type	RP-SMA
Antenna gain level (max)	5 dBi
Ethernet LAN (RJ-45) ports	4
Certification	CE, FCC, RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Product color	White
LED indicators	LAN, Link, Power, WAN

Weight and Dimensions

Depth	130 mm
Width	192 mm
Height	33 mm
Weight	- g