Quick Installation Guide
VN020-F2v
300Mbps Wireless N VoIP
VDSL/ADSL Modem Router
Connect the Hardware
Configure the Modem Router
Enjoy the Internet
Now you can enjoy your internet.
2. Connect your router to the internet
using a web browser
.
Enter http://tplinkmodem.net or 192.168.1.1 in the address bar
of a web browser. Use admin for both username and password,
and then click Login.
A
B
Choose Quick Setup in the main menu, and then click Next to start the
conguration.
Follow the step-by-step instructions to set up an internet
connection.
Wired Connection
Wireless Connection
Connect wirelessly by using the SSID (network name) and Wireless
Password printed on the product label at the bottom of the router.
1. Connect your computer to the router via a wired or wireless
connection.
Power Adapter
Phone Cable
Phone (Optional)
2
If you don’t need a phone service, directly connect the modem router to the phone jack
with the provided phone cable, then follow steps 3 and 4 to complete the hardware
connection.
3
Push in to turn on
the modem router.
Phone Cable
Phone Jack
1
DSL Splitter
LINE
PHONE
MODEM
Note: The DSL LED takes 1 to 2 minutes to stabilize.
4
Verify that the Power and DSL
LEDs turn stable before
continuing with the conguration.
Phone
VoIP Service
Ethernet cable
Note: If the login page does not appear, please refer to FAQ->Q1.
http://tplinkmodem.net
admin
admin
Login
To Next Page
Need help?
General
