TRICKSTUFF® GMBH
SCHWABENMATTEN 17A
79292 PFAFFENWEILER
GERMANY
TECH-SUPPORT@TRICKSTUFF.DE SERVICE MANUAL – PICCOLA PUMP V2024_02. PAGE 1 OF 25
SERVICE MANUAL – PICCOLA CARBON PUMP
V2024_02
CONTENT
1. GENERAL INFORMATION
2. SAFETY
3. TOOLS
4. SERVICE PICCOLA PUMP
1. General information
1. Read the manual completely before using the products and follow the instructions contained
in these instructions when installing, using and maintaining the product in order to avoid
personal injury and damage to property.
2. The installation and maintenance of Trickstuff products require a basic knowledge of handling
bicycle components and should only be performed by qualified bicycle mechanics. During
installation or maintenance, clean working conditions must be ensured so that dirt entry into
the brake systems is avoided.
3. If any of the instructions in this manual are unclear, do not proceed with installation or
maintenance. Contact your local Trickstuff dealer or the Trickstuff support-team.
2. Safety
The installation, use and maintenance of Trickstuff products requires that you have read and
understood the following safety instructions.
1. General safety instructions
• Always follow the instructions in the manual when working on Trickstuff products.
• We recommend only Trickstuff products for the use with Trickstuff brakes.
• When working on the system, pay attention to appropriate personal protective equipment
such as gloves and safety goggles.
• Trickstuff products are to be used exclusively in accordance with their intended use.
Otherwise the user assumes the responsibility.
Warning!
Improper installation, use and maintenance of components pose a considerable
risk and can lead to accidents with serious injuries including death.
2. Brake pads and brake discs
• Visually inspect the brake pads and rotors before each ride:
o Worn brake pads and/or brake discs can lead to sudden brake failure.
o Lubricants such as oil or grease on the brake pad or brake disc can limit the
effectiveness of the brake.
o Corrosion can cause the friction material to detach from the backing plate,
resulting in brake failure. Replace brake pads that show signs of rust
immediately.
To Next Page
Need help?
General
