General
6
A previously paired device has not
automatically reconnected
It can take up to 30 seconds for
previously connected devices to
automatically reconnect after turning
the ignition off and back on.
If you have waited longer than 30
seconds and no connection is made,
make sure the device is turned on and
in range (refer to the device
manufacturer’s instructions for
information about the expected range).
In the paired devices menu, check that
the device in question is on the list, and
that a tick appears next to the name. If
it is not present, repeat the pairing
process. If the device is present but
there is no tick, select the device and
choose “select” to force reconnection.
If connection is still not made, make
sure that the instructions provided in
the My Triumph Connectivity Module
Owner’s Handbook have been followed
correctly and, if necessary, repeat the
process.
Why have I been asked for permission to
access various functionalities on my
phone?
We need to ask for your permission to
access various functionalities on your
phone, in order to enable some features
of the My Triumph Connectivity System.
If permission is not given, some features
may not function correctly.
Refer to the phone manufacturer’s
instructions for details of how to adjust
these permissions once granted or
denied.
To Next Page
Loading...
Need help?
General
