Triumph Speed Triple R User Manual

Maintenance and Adjustment
115
Compression Damping Adjustment -
Speed Triple R
1. Compression damping adjuster
The compression damping adjuster is
located at the top of the left hand fork.
To change the compression damping
force, rotate the adjuster clockwise to
increase, or anti-clockwise to decrease
using a 3 mm Allen key.
Always count the number of clicks from
the fully clockwise position noting that
the first stop (click position) is counted
as zero.
Note:
• The motorcycle is delivered from the
factory with the compression
damping set at 19 clicks from the
fully clockwise position.
Rear Suspension Adjustment
The rear suspension unit is adjustable
for both rebound and compression
damping.
Rebound Damping Adjustment -
Speed Triple S
1. Rebound damping adjuster
The rebound damping adjuster is located
at the bottom of the rear suspension
unit on the left hand side of the
motorcycle.
To adjust the rebound damping setting,
rotate the adjuster clockwise to increase
rebound damping and anti-clockwise to
decrease.
Always count the number of anti-
clockwise turns from the fully clockwise
position.
Note:
• The motorcycle is delivered from the
factory with the rebound adjuster
set at 2.5 anti-clockwise turns from
the fully clockwise position.
1
chcy_2
1
cgfe

Triumph Speed Triple R Specifications

General

Engine Capacity	1050 cc
Transmission	6-speed
Seat Height	825 mm
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, 12-valve, inline 3-cylinder
Power	148 hp (110 kW) @ 10, 500 rpm
Torque	117 Nm at 7, 150 rpm
Front Suspension	Öhlins 43mm NIX30 upside down forks with adjustable preload, rebound and compression damping
Rear Suspension	Öhlins TTX36 monoshock, fully adjustable
Front Brakes	Twin 320mm floating discs, Brembo 4-piston radial calipers
Fuel Tank Capacity	15.5 litres