Triumph Speed Triple Handbook

95
Maintenance and Adjustment
Brake Fluid Level Inspection and
Adjustment
1. Front brake fluid reservoir, MAX
level line
2. MIN level line
The brake fluid level in the reservoirs must be
kept between the MAX and MIN level lines
(reservoir held horizontal).
Remove the reservoir cover.
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
Refit the reservoir cover ensuring that the
diaphragm seal is correctly fitted. Tighten the
cap retaining screws to 1Nm.
1. Rear brake fluid reservoir
2. Upper level line
3. Lower level line
1
2
jajc_1
Warning
If there has been an appreciable drop in
the level of the fluid in either fluid
reservoir, consult your authorised Triumph
dealer for advice before riding. Riding with
depleted brake fluid levels, or with a brake
fluid leak is dangerous and will cause
reduced brake performance potentially
leading to loss of motorcycle control and
an accident.
1
3
2
cggv

Triumph Speed Triple Specifications

General

Transmission	6-speed
Engine Type	Liquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front Suspension	Öhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear Suspension	Öhlins monoshock, adjustable compression, rebound and preload
Front Brakes	twin 320mm floating discs
Rear Brakes	Brembo single piston caliper, 220mm disc
Fuel Tank Capacity	15.5 litres