EasyManuals Logo

Triumph Sprint GT 1050 User Manual

Triumph Sprint GT 1050
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
113
Maintenance and Adjustment
Where to be Careful
Avoid spraying water with any great force
near the following places:
Instruments;
Brake cylinders and brake calipers;
Under the fuel tank;
Drive chain;
Headstock bearings;
Wheel bearings and suspension
linkage bearings.
Note:
Use of soaps that contain high
levels of alkaline will leave a
residue on painted surfaces, and
may also cause water spotting.
Always use a low alkaline soap to
aid the cleaning process.
After Washing
Remove the plastic bags and tape, and clear
the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle operation.
Start the engine and run it for 5 minutes.
Ensure adequate ventilation for the exhaust
fumes.
Use a dry cloth to absorb water residue. Do
not allow water to stand on the machine as
this will lead to corrosion.
Seat Care
To help maintain its appearance, clean the
seat using a sponge or cleaning cloth with
soap and water.
Caution
Do not spray any water at all under the
cockpit area. The engine’s air intake ducts
are located in this area, and any water
sprayed in this area could enter the airbox
and engine, causing damage to both items.
Caution
Use of high-pressure spray washers is not
recommended. When using pressure
washers, water may be forced into
bearings and other components causing
premature wear from corrosion and loss of
lubrication.
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil-free brake disc
cleaner.
Caution
Use of chemicals or high-pressure spray
washers is not recommended for cleaning
the seat. When using chemicals or pressure
washers the seat cover may get damaged.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Sprint GT 1050 and is the answer not in the manual?

Triumph Sprint GT 1050 Specifications

General IconGeneral
Engine TypeLiquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Engine Capacity1050 cc
Bore x Stroke79 x 71.4 mm
Compression Ratio12.0:1
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveX ring chain
ClutchWet, multi-plate
Gearbox6-speed
Front Tyre120/70 ZR17
Rear Tyre180/55 ZR17
Max Torque108 Nm @ 6, 300 rpm
ExhaustStainless steel 3 into 1 exhaust system
FrameAluminium beam perimeter
Front Suspension43 mm upside down forks with adjustable preload
Rear SuspensionMonoshock with adjustable preload and rebound damping
Front BrakesTwin 320mm floating discs, Nissin 4-piston calipers
Rear BrakesSingle 255mm disc, Nissin 2-piston caliper
Seat Height815 mm
Fuel Tank Capacity20 litres
Max Power130 PS / 128 bhp (96 kW) @ 9200 rpm

Related product manuals