To Next Page
N
nbairdAug 1, 2025
Why Troy-Bilt Pressure Washer won't start or runs rough?
- MMiranda LunaAug 1, 2025
There are several potential reasons why your Troy-Bilt pressure washer won't start or runs rough: * The oil level might be low, so fill the crankcase to the proper level. * The air cleaner might be dirty, so clean or replace it. * The unit may be out of or have stale fuel, or water in the fuel. In these cases, fill the fuel tank with fresh fuel after draining it. * The spark plug wire might not be connected, so connect it to the spark plug. The spark plug itself might be bad, so replace it. * The fuel mixture may be excessively rich, in which case you should contact a local service facility.
General
