Frequently Asked Questions
Truma AquaGo
How Does the Truma AquaGo Work?
The Truma AquaGo instant water heater is connected between the vehicle's fresh water supply and its hot water system. When the appliance is switched on, the
burner starts automatically as soon as the hot water faucet is opened and the flow of the water is greater than approximately 0.4 gallons per minute (1.5 l/min). The
stepless burner control adjusts heater output based on flow and inlet water temperature, maintaining an outlet temperature of approximately 120 °F (49 °C).
A temperature stabilizer minimizes outlet temperature fluctuations. A comfortable water temperature at the faucet or shower is achieved by mixing with cold water.
The burner switches off automatically when the faucet is closed to conserve LP gas. The Truma AquaGo basic does not have frost protection and should not be
used or filled with water when there is a danger of freezing.
To Next Page
Need help?
General
