TSC Printronix MH261T Series User Manual

36
Item
Description
Default
Density
Set the printing darkness. Available setting range: 0 to 30.
16
Print Speed
Set the print speed. Available setting range is 2~18 for 203dpi and 2~14 for 300dpi;
1.5~6 for 300dpi..
203 dpi: 6
300 dpi: 4
Slew Speed
Set feed speed
203 dpi: 6
300 dpi: 4
Back Speed
Set back speed
2
Tear Off
Adjust media stop location. Available setting value range: -120~120 dots.
0 dot
Print mode
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Peeler Off: Enable the label peel off mode.
Cutter: Enable the label cutter mode
Rewind: Enable the label rewind mode
Applicator: The printer prints a label when it receives a signal from the applicator.
Tear Off
Print Width
Set the print width. Available setting range: 2 ~ 999 dots.
812
List Fonts
Print the current fonts list from the memory devices to the label.
N/A
List Images
Print current printer available images list stored at the memory device to the label.
N/A
List Formats
Print current printer available formats list from the memory devices to the label.
N/A
List Setup
Print current printer configuration to the label.
N/A
Control Prefix
Set control prefix character.
7E(~)
Format Prefix
Set format prefix character.
5E(^)
Delimiter Char
Set delimiter character.
2C(,)

TSC Printronix MH261T Series Specifications

General

Brand	TSC
Model	Printronix MH261T Series
Category	Barcode Reader
Language	English