TSC TC210 Series User Manual

TC200/ TC300/ TC210/ TC310
Bar Code Printer Service Manual
28
4. Thread the 5-pin peel-off
module harness through the
front slot of lower inner cover.
5. Plug in the peel-off module
harness connector to the
5-pin red socket on the main
board.
Note:
The connector located on J604
for TC210/TC310 series.
The connector located on JP19
for TC200/TC300 series.
6. Embed the tenons into the both sides mortise of lower inner cover and close the
peel-off cover.

TSC TC210 Series Specifications

General

Brand	TSC
Model	TC210 Series
Category	Barcode Reader
Language	English