TSI Instruments AeroTrak 9110 Series User Manual

-2-
Thank you for purchasing a TSI AeroTrak
®
Model 9110
Portable Airborne Particle Counter (particle counter).
This guide will help you quickly begin using your particle
counter.
More detailed information is in the manual located on
the included TrakPro™ Lite Secure Software CD.
Please refer to the Operation Manual if you have
questions on the operation of your new particle counter.
Safety
This section gives instructions to promote safe and
proper handling of the AeroTrak
®
Portable Airborne
Particle Counter.
I M P O R T A N T
There are no user-serviceable parts inside the
instrument. Refer all repair and maintenance to a
qualified factory-authorized technician. All maintenance
and repair information in this manual is included for use
by a qualified factory-authorized technician.
L A S E R S A F E T Y
The Model 9110 Portable Airborne Particle Counter is a
Class I laser-based instrument. During normal operation,
you will not be exposed to laser radiation. However,
precautions should be taken to avoid exposure to
hazardous radiation in the form of intense, focused,
visible light. Exposure to this light may cause blindness.
DO NOT remove any parts from the particle counter
unless you are specifically told to do so in this manual.
DO NOT remove the housing or covers. There are no
user-serviceable components inside the housing.
The use of controls, adjustments, or
procedures other than those specified in
this manual may result in exposure to
hazardous optical radiation.
C A U T I O N
The shipping containers and packaging provided with
your particle counter are specially designed to protect
the instrument. Please retain the packaging for shipping
the instrument for service or calibration. Use of other
packaging may result in damage to the instrument.
W A R N I N G
The shipping containers and packaging provided with
your particle counter are specially designed to protect
the instrument. Please retain the packaging for shipping
the instrument for service or calibration. Use of other
packaging may result in damage to the instrument.
Labels
Advisory labels and identification labels are attached to
the outside of the particle counter housing and to the
optics housing on the inside of the instrument.
Serial number label
(back panel)
Laser instrument
compliance label
(back panel)
Class 1 Laser Product
This product is in complete
compliance with 21 CFR 1040,
10 and 1040, 11
Laser radiation symbol
label (back panel)
Calibration label (right-
side panel)
European symbol for
non-disposable item.
Item must be recycled.
(back panel)
High voltage warning
label (internal - 2X)
Laser warning label
(internal)
Unpacking
1. Carefully unpack the particle counter from the
shipping container and verify that all the items listed
in the following table are present.
2. Contact TSI immediately if items are missing or
broken.
3. Additional items may be included if you ordered
accessories or spare parts.

TSI Instruments AeroTrak 9110 Series Specifications

General

Brand	TSI Instruments
Model	AeroTrak 9110 Series
Category	Laboratory Equipment
Language	English