TSM Control Systems,
Ard Easmuinn,
Dundalk, Co. Louth, Ireland
Tel: (+353) 42-9335560 Fax: (+353) 42-9334422
Email: info@tsm-controls.com
Website: www.tsm-controls.com
2. Weight hopper
Calibration.
(Front door of the blender
must be open to calibrate
the load cell)
• Touch
• Touch
• Enter the supervisor password
(Factory default password is set to 5560)
System menu
• Touch
• Touch
Some the system parameters can be changed from the
calibration menu, so it is advisable to restrict the number of
personnel who have access to the password.
Doc no TD 107 Rev 1.1
Page 2
To Next Page
Loading...
General