EasyManuals Logo
Home>TurboChef>Oven>High h Batch

TurboChef High h Batch User Manual

TurboChef High h Batch
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
TurboChef Global Operations
4240 International Pkwy, Suite 105
Carrollton, Texas 75007 USA
US: 800.90TURBO (800.908.8726)
International: +1 214.379.6000
Fax: +1 214.379.6073
turbochef.com
DOC-1032/Revision C/
August 2008
Stacking HhC 3240 Ovens
Follow all instructions in the Installation Manual (part number HHC-6651), included with each oven.
Stacking HhC 2020 Ovens
WARNING: DO NOT use this appliance without the legs installed. When stacking, the legs must be installed on the bottom oven only.
WARNING: Make sure all HhC 2020 ovens are unplugged before stacking.
WARNING: DO NOT stack ovens more than 3 high.
WARNING: DO NOT attempt to lift the oven with fewer than 2 people.
1. Remove the legs from the oven(s) that are going to be stacked on top.
2. Stack the top oven on the bottom oven. If stacking three ovens, stack only the middle oven at this point.
3. Remove the screws marked A and B in the below gure.
4. Align each bracket with the holes in the bottom oven and reinstall the screws marked A in the below gure.
5. Align each bracket with the holes in the top oven and reinstall the screws marked B in the below gure.
6. If stacking three ovens, repeat steps 2-5 above to stack the top oven to the middle oven.
7. Ensure each stacked oven is secured to the oven beneath it via two stacking brackets – one on each side.
A
A
B
A
A
B
Bracket
Bracket

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TurboChef High h Batch and is the answer not in the manual?

TurboChef High h Batch Specifications

General IconGeneral
BrandTurboChef
ModelHigh h Batch
CategoryOven
LanguageEnglish

Related product manuals