Installation
Basic Guidelines
02
X X
Take care not to place the panel in direct
sunlight.
For a seamless experience, the display panel
has to be mounted rmly. If needed, add
some extra padding (ex: sponge) for support
between the panel and the wall to prevent it
from shaking while writing.
Rotate the knob on the screw mount
anticlockwise and unscrew the screw mount
halfway.
Remove the protection lm from the velcro
tape on the clip mount. Keep the device on
the centre of display. Make sure the device
is not leaning forward or falling behind.
Press the clip rmly on back of display.
Rotate the knob on the screw mount
clockwise to tighten the mount, keeping the
device locked in place.
Leaning forward
Rotate the knob
to keep the
device locked in
place
Falling behind
www.gotutorplus.com
TutorPlus Live installation v1.1
To Next Page
Loading...
Need help?
General