Read these instructions before attempting to operate this product and save
these instructions for future reference.
Important Safety Instructions
● This fan is designed for a 120v/60Hz electric supply.
● Before cleaning or moving the fan, make sure it is unplugged. When unplugging, grip the rubber part of the
plug and do not pull the lead wire.
● Do not pull the plug with wet hands to avoid electrical shock.
● Do not damage, excessively bend, stretch, twist or press the electrical cord. Do not replace
the electrical
cord yourself. If the electric cord is damaged, it must be replaced by qualified person in order to avoid a
danger.
● Do not put any foreign object in the inlet or outlet grilles. That may damage the fan, cause a risk or lower the
power of the wind.
● Avoid water dripping
in the appliance and proximity to open flames. Avoid placing the appliance near of
inflammable or explosive objects.
● Do not spray pesticide or detergent
directly on the fan to avoid any damage to the rubber finish.
● When
fan will not be used for a long time, please turn off and unplug the fan. Remove batteries from remote
controller.
● Do not ty to repaire the fan yourself. It must be done by a qualified technician. Contact Customer service for
a service centre near you.
READ AND SAVE THESE INSTRUCTIONS
PAGE 2
To Next Page
Loading...
Need help?
General
