A.
B.
C.
D.
E.
Hardware Installation
1. Unlock the Carriage
Before operating the scanner, please unlock the restraint.
To unlock the restraint, move the restraint toward the
unlocked position as shown in picture A.
2. Install the Interface Card--For PC Users Only
(Macintosh users, please skip to Step 3.)
1. Turn off the computer and remove the housing cover.
2. Locate an available slot.
3. Insert the SCSI card by pressing it gently into the slot
as shown in picture B.
4. Replace the cover housing.
3. Connect the Cable to the SCSI Card
1. PC users--Connect the SCSI cable to the SCSI
interface card (see picture C).
Mac users--Connect the SCSI cable to the SCSI port
on your Macintosh (see picture D).
2. Connect the other end of the SCSI cable to the
scanner.
3. If your scanner is not chained to other SCSI devices,
connect the Terminator that came with your scanner
to the remaining SCSI port on your scanner.
4. Connect the Power
Plug in the power adapter cord as shown in picture E.
Astra 1220S Color Scanner – Quick Start Guide
Lock Unlock
To Next Page
Need help?
General
