Unitech AS10 User Manual

AS10 Quick Start Guide
HOW CAN WE HELP YOU?
Scan here to return your scanner to its original factory settings, a
useful feature for troubleshooting purposes.
Default Settings
The AS10 is a plug-and-play scanner. It does not require a
driver and should be recognized as a generic HID device by
your computer, similar to a standard keyboard. This allows you
to scan into any eld that you could normally type into.
Unitech’s professional support team is available to quickly
answer questions or technical-related issues. Should equipment
issues occur, please contact a Unitech Service Representative
at (800) 861-8648 for more information.
Trigger Mode
Scan this series of barcodes to switch back to Trigger Mode. In Trigger
Mode, the AS10 will scan only when the scanner button is pressed.
1
2
3
4
%$ + / 2

Unitech AS10 Specifications

General

Type	Handheld bar code reader
Wavelength	632 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	100 reads/s
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, JAN, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	80 mA
Certification	FCC
Product color	Black
Housing material	ABS synthetics
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 95 %

Weight and Dimensions

Depth	63.2 mm
Width	81 mm
Height	180 mm
Weight	120 g