8
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
1.4.3 Install the Battery Cover
Insert the battery cover in the direction as shown in the picture below:
1. There are three hooks on the bottom of battery cover, align the hooks with
the recesses on the battery compartment.
2. Insert the battery cover up to 45 degrees (45°) angle, from bottom to top.
3. Press down the battery cover to secure in place. Make sure there is no gap
between the device and the battery cover.
4. Push the battery lock to the left to lock. Make sure the battery cover is
securely closed, or you may not be able to turn on the terminal.
To Next Page
Need help?
General
