feature has been enabled by your hearing healthcare
professional. Over time, the hearing instruments will
adjust the default volume settings in the automatic
program to the levels that you typically use.
Your hearing healthcare professional can help you
identify your different volume control settings.
SmartFocus
™
(available exclusively with Latitude 16)
If the toggle has been configured as a smartFocus,
push in the toggle portion on the back of the hearing
instrument to improve the clarity of sounds in front of
you, such as speech. For greater overall listening
comfort in noisy listening situations, push the portion
of the toggle located at the bottom of the hearing
instrument. Each step will change the hearing
instrument performance. Sometimes multiple steps
are required to achieve the desired listening results.
After each step wait for about 4-5 seconds to allow the
hearing instrument to adjust to the new setting.
If duoLink is enabled, the hearing instrument can also
be set so that by changing the volume on one hearing
12
Volume Setting Beeps
Ideal volume level 1 beep
Increased loudness 1 beep + 1 high-pitched beep
Decreased loudness 1 beep + 1 low-pitched beep
To Next Page
Loading...
Need help?
General
