SCUBAPRO S600-S550 SECOND STAGES
2003 SCUBAPRO
Important note
: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
2
TOOLS NEEDED FOR REPAIR
OF S600-S550
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
Quantity Part Number Description
1 43.300.227 Balance Chamber Adjusting Tool
1 set 10.102.100
(Peter Built)
Brass o’ring picks
1 tube 41.047.000 Christo-Lube
Christo-Lube
OXYGEN COMPATIBLE LUBRICANT
P/N 41-047-000
1 47.010.000 Counter Mat
1 41.496.101 Lubricant syringe
Monoject
1 43.040.000
(Scubapro)
Universal Tool
1 Jeweler’s screwdriver (3mm)
1 Philip’s Screwdriver
1 11.153.500
(Peter Built)
Ball-end Allen Wrench
1 43.300.225
(Scubapro)
VIVA Flow Vane Removal Tool
1 20.500.200
(Peter Built)
Pneumatic Adjusting tool
1 18.300.500
(Peter Built)
Blow Gun/Air Nozzle
ICON LEGEND
Inspect carefully, replace if needed
Monoject
Lubricate properly
Replace annually
Dynamic o’ring, replace annually and lubricate properly
P
/
N
4
3
0
4
0
0
0
0
TOOLS
NEEDED
No tools needed for this step
Indicates the regulators affected by this
step
To Next Page
Loading...
Need help?
General
