Val Controls I 24-BF Series User Manual

DHP-UM-020
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 12
30/38
No. 105
Control loop is not calibrated
Description
The control loop is not calibrated
Trouble shooting
Calibrate the control loop from the advanced menu (2.1)
No. 106
Transmitter loop is not calibrated
Description
The transmitter loop is not calibrated
Trouble shooting
Calibrate the transmitter loop from the advanced menu (2.2)
No. 108
Position loop is not calibrated
Description
The position loop is not calibrated
Trouble shooting
Calibrate the position loop from the advanced menu (2.3)
No. 109
Analogue input loop 2 is not calibrated
Description
The analogue input loop 2 is not calibrated
Trouble shooting
Calibrate the analogue input loop 2 from the advanced menu (2.4)
No. 110
Analogue input loop 3 is not calibrated
Description
The analogue input loop 3 is not calibrated
Trouble shooting
Calibrate the analogue input loop 3 from the advanced menu (2.5)
No. 111
Analogue input loop 4 is not calibrated
Description
The analogue input loop 4 is not calibrated
Trouble shooting
Calibrate the analogue input loop 4 from the advanced menu (2.6)
No. 112
Analogue input loop 5 is not calibrated
Description
The analogue input loop 5 is not calibrated
Trouble shooting
Calibrate the analogue input loop5 from the advanced menu (2.7)
No. 113
Analogue output loop 1 is not calibrated
Description
The analogue output loop 1 is not calibrated

Val Controls I 24-BF Series Specifications

General

Input Signal	4-20 mA
Housing Material	Aluminum
Type	Electropneumatic
Action	Single-acting or double-acting
Supply Pressure	20-100 psi
Ambient Temperature Range	-40°C to +85°C
Enclosure Rating	IP66/NEMA 4X
Compliance	ATEX, IECEx