Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
is configured based on application requirement.
Length: 2 bytes
Description:
This parameter reflects the error associated with
the hardware or software components associated
with a block. It is a bit string so that multiple
errors may be shown.
Length: 1 bytes
Value: Standby
Description:
State of the function block application state
machine
Read Write
Value_1
Value_2
Value_3
Value_4
Value_5
Value_6
Value_7
Value_8
Value_9
Value_10
Value_11
Value_12
Value_13
Value_14
Value_15
Description:
Read/Write Test parameters – used only for
conformance testing
Length: 32 bytes
Read Only
Value: “ “
Description: String identifying the tag of the
resource which contains the Device Description
for this resource.
Value: “0x000105” – Microcyber Inc
Length: 4 bytes
Read Only
Description:
Manufacturer identification number – used by an
interface device to locate the DD file for the
To Next Page
Loading...
Need help?
General
