Val Controls IHP24-BF User Manual

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
20/58
INITIAL VALUES.
4: Restart Processor – perform a warm start-up
Description: Allows a manual restart to be
initiated. Several degrees of restart are possible.
See above.
FEATURES
[Options]
17
Length: 2 bytes
Read Only
Description: Used to show supported resource
block options
FEATURES_SEL
[Options]
18
Length: 2 bytes
Read Write
Description: Used to select resource block options
CYCLE_TYPE
[Tuning]
19
Length: 2 bytes
Read Only
Description: Identifies the block execution
methods available for resource.
CYCLE_SEL
[Others]
20
Length: 2 bytes
Read Write
Value: 0x0000
Description: Used to select the block execution
methods for this resource.
MIN_CYCLE_T
[Process]
21
Length: 4 bytes
Read Only
Description: Time duration of the shortest cycle
interval of witch the resource is capable. 0
1/32mSek
MEMORY_SIZE
[Others]
22
Length: 2 bytes
Read Only
Value: 512 Kbyte
Description: Available configuration memory in
the empty resource. To be checked before
attempting a download
NV_CYCLE_T
[Process]
23
Length: 4 bytes
Read Only
Description: Interval between writing copies of
NV parameters to non-volatile memory. Zero
means Never. 0 1/32mSek
FREE_SPACE
[Diagnostic]
24
Length: 4 bytes
Read Only

Val Controls IHP24-BF Specifications

General

Brand	Val Controls
Model	IHP24-BF
Category	Valve Positioners
Language	English