Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
4: Disabled
Length: 2 bytes
Read Write
Value: 0x0000
Description: The current alert status,
unacknowledged states, unreported states, and
disabled states of alarms associated with function
block.
Length 2 bytes
Read Write
Description: Selection of whether alarms associated
with the function block will be automatically
acknowledged.
Length 4 bytes
Read Write
Value: 0.5%
Range: 0-50%
Description: Amount the PV must return with the
alarm limits before the alarm condition clears. Alarm
hysteresis as a percent of the span of the PV
Length 1 byte
Read Write
Value: 0
Description: Priority of the High high alarm
Length 4 bytes
Read Write
Value: 1. #INF
Description: The setting for high high alarm in
engineering units
Length 1 byte
Read Write
Value: 0
Description: Priority of the high alarm
Length 4 bytes
Read Write
Value: 1 #INF
Description: The setting for high alarm in
engineering units